home *** CD-ROM | disk | FTP | other *** search
/ BBS Toolkit / BBS Toolkit.iso / pc_board / pcbdp197.zip / SYSOP.DOC < prev    next >
Text File  |  1992-08-10  |  17KB  |  403 lines

  1.                       PCB-Deposit for PCBoard v14.5a
  2.  
  3. TABLE OF CONTENTS
  4.  
  5.    GENERAL INFORMATION..................................................2
  6.  
  7.  
  8.    DISCLAIMER...........................................................2
  9.  
  10.  
  11.    REGISTRATION INFORMATION.............................................2
  12.  
  13.  
  14.    FILES IN ZIP.........................................................3
  15.  
  16.  
  17.    GENERAL INFORMATION (ABOUT TPA)......................................3
  18.  
  19.  
  20.    INSTALLATION.........................................................4
  21.  
  22.             Security.....................................................5
  23.       
  24.             Max Minutes per Day..........................................5
  25.  
  26.             Max Minutes to Store.........................................5
  27.  
  28.             Max Bytes per Day............................................5
  29.  
  30.             Max Bytes to Store...........................................5
  31.  
  32.             # Bytes Per Minute...........................................5 
  33.  
  34.    PCB-DEPOSIT RUN TIME.................................................6
  35.  
  36.             Sample Batch File Setup......................................7
  37.  
  38.             Multi-Node Operation.........................................7
  39.  
  40.             Text Files...................................................7
  41.  
  42.  
  43.    CLOSING INFORMATION..................................................8
  44.                    
  45.             Multi-Lingual Support........................................8
  46.  
  47.             PCBoard Macros and PCB-Deposit Macros........................8
  48.  
  49.  
  50.  
  51.  
  52.  
  53.  
  54.                        PCB-Deposit for PCBoard v14.5a
  55.  
  56. NOTE:   If you are using DPSM.EXE and come to a USER that is BLANK or
  57.         messed up, you need to PACK your USERS.INF file as it is corrupted.
  58.         This is a bug in PCBoard 14.5.  Update to PCBoard 14.5a to fix the
  59.         problem.
  60.  
  61. GENERAL INFORMATION
  62.  
  63.     PCB-Deposit was written because I had seen a LACK of other Deposit
  64.     Doors.  PCB-Deposit also uses a TPA (Third Party Application) which is     
  65.     installed within the USERS.INF of your BBS.  You will find that the door   
  66.     works very well under a Network or Multi-Node BBS.
  67.  
  68.     The Door basically allows your USERS to Deposit their UNUSED BYTES or
  69.     TIME for each day.  When a time comes that they need to have these
  70.     two fields for downloading files or to stay on-line longer, they can
  71.     open PCB-Deposit, grab what they want and use it.
  72.  
  73.  
  74. DISCLAIMER
  75.  
  76.     Cam DeBuck Software claims no responsibility for any damages
  77.     caused by the use or misuse of this product.  This product is
  78.     distributed "as is" with no warranty expressed or implied.  The author
  79.     will not be responsible for any losses incurred, either directly or
  80.     indirectly, by the use of this product.  Use this product entirely at
  81.     your own risk.  The author reserves the right to make modifications at
  82.     any time.
  83.  
  84.     * See DISCLAIM.DOC or DISCLAIM.WP for more details on the Disclaimer *
  85.  
  86.  
  87. REGISTRATION INFORMATION
  88.  
  89.     PCB-DEPOSIT is distributed as SHAREWARE software.  You are free to
  90.     copy and distribute this software freely.  However, if you find it of use
  91.     to you, you are encouraged to register your copy.  Registering your copy
  92.     of the software helps the author continue to provide professional-quality
  93.     software at very reasonable prices.
  94.  
  95.     The Basic Registration is $20.00 and includes the REGISTERED KEY file,
  96.     access to the support BBS, and lifetime registration.  Notice, that once you 
  97.     registered, you're registered for life (none of this one year support fee, 
  98.     etc..) or as long as I'm in the BBS world; and as they say, "Once a Sysop, 
  99.     always a Sysop".   Registration can be completed using VISA,               
  100.     MasterCard, Discover, Diners Club, Carte Blanche, or JCB credit cards by   
  101.     calling either:    BBS (801)489-3558 [HST 1440]  
  102.                         BBS (801)489-7558 [2400 Baud]
  103.  
  104.     Simply log on and at the main board prompt, give "PURCHASE" command.  Then 
  105.     select the product(s) and use the purchase command within the door.
  106.  
  107. FILES IN ZIP
  108.  
  109.     DEPOSIT.KEY   - KEY file used to tell if REGISTERED or UNREGISTERED.
  110.     DEPTEXT       - Text file for Displaying Information (Like PCBTEXT)
  111.     DPSM.EXE      - PCB-Deposit System Manager for Edit Users
  112.     EVENT         - Tells a User that he/she cannot withdraw time due to an
  113.                     Event Pending
  114.     LVLMIS        - Tells a User that his/her Security Level is not listed.
  115.     LOCKOUT       - Tells a User that he/she has been LOCKED OUT from Door.
  116.     PCBDEP.EXE    - PCB-Deposit Main EXE file for Executing Door
  117.     REGISTER.DOC  - Registration Information
  118.     REGISTER.WP   - Registration Information in WordPerfect v5.1 format
  119.     REGISTER.EXE  - Registration Information in Executable format
  120.     SYSOP.DOC     - Sysop Documentation text file/Installation
  121.     SYSOP.WP      - Sysop Documentation in WordPerfect v5.1
  122.     WELCOME       - PCB-Deposit Welcome file for ASCII users.
  123.     WELCOMEG      - PCB-Deposit Welcome file for GRAPHIC users.
  124.     DEPOSIT.CFG   - Contains information about SETUP and Security Levels
  125.     DISCLAIM.DOC  - Contains specific information about the disclaimer
  126.     DISCLAIM.WP   - Disclaimer in WordPerfect v5.1 format
  127.  
  128.  
  129. GENERAL INFORMATION (About TPA)
  130.     
  131.     PCB-Deposit uses PCBoard 14.5 TPA technology for BBS's.  Basically,
  132.     a TPA is a Third Party Application which is stored via the USERS.INF
  133.     file.  PCB-Deposit uses a STATIC number of 55.  This will increase
  134.     your USERS.INF file by 55 bytes for each user on your system.
  135.  
  136.     Why use a TPA?  Whenever you DELETE a user from your System, he will
  137.     also be deleted from PCB-Deposit.  No need to pack two different USERS
  138.     files.  It also makes it nice for the Door Developer to handle
  139.     information that would not be there in normal situations.
  140. INSTALLATION
  141.  
  142.     Since you are now reading this documentation, I imagine that you are
  143.     already in a directory from which you will be running PCB-Deposit.
  144.  
  145.     1)  You will first need to go to your PCB directory and run PCBSM.EXE.
  146.     2)  Select D (User Info File Maintenance)
  147.     3)  Select C (Add/Update Third Party Application)
  148.     4)  You will now come up with a Menu that looks like this:
  149.  
  150.            Name of Third Party Application?
  151.            Version      :
  152.            Static Size  : 0
  153.            Dynamic Size : 0
  154.            Keyword      :
  155.  
  156.     5)  The Name of the TPA will be?  PCB-DEPOSIT
  157.     6)  Version       : 1
  158.     7)  Static Size   : 55
  159.     8)  Dynamic Size  : 0
  160.     9)  Keyword       : DEPOSIT
  161.    10)  Press:  Pg/Dn to install TPA.
  162.  
  163.    Optional (#11)
  164.  
  165.    11)  I suggest that you now PACK your users file to make sure that the
  166.         USERS.INF file is not corrupted.  Some TPA's will corrupt it and I
  167.         HIGHLY suggest that you do it now to make sure all is well with
  168.         your USERS.INF file. (See PCBoard Documentation on how to PACK
  169.         your USERS file).
  170.  
  171.    12)  Now that your TPA is installed, you will now need to load up
  172.         PCBSetup and edit your DOORS.DAT/LST file for the appropriate Conference.
  173.         Be sure you tell PCBoard to CREATE a USERS.SYS when opening the door.
  174.         The File Name of the DOOR will be "DEPOSIT" since we told PCBSM the
  175.         KEYWORD for accessing the door was DEPOSIT.
  176.  
  177.     Now that we have your TPA installed for PCB-Deposit and have edited
  178.     your DOORS.DAT/LST file, you will need to go to your PCB-Deposit Directory
  179.     and run DPSM.EXE.
  180.  
  181.     1)  Select F (Files/Path)
  182.     2)  Give it your PATH to your PCB directory.
  183.     3)  Hit ESC
  184.     4)  Select S (Security Information)
  185.  
  186.  
  187.  
  188.  
  189.  
  190.  
  191.  
  192.     Security
  193.  
  194.          This will be the security level of the user who is allowed to
  195.          use the door.  There are a total of 17 pages (255 Security Levels).
  196.          The order in which security levels are placed DO NOT matter.  If you
  197.          have duplicate security levels, the first one in the list will be
  198.          used.  Use PgDn or PgUp to toggle between pages.  A total of 15
  199.          security levels are displayed on each screen.
  200.  
  201.     Max Minutes Per Day
  202.  
  203.          This is the Maximum Minutes Per day the User is allowed to withdraw
  204.          from his/her account.
  205.  
  206.     Max Minutes To Store
  207.  
  208.          This is the Maximum Minutes that the user is allowed to store
  209.          in his/her account.  Note: If the Max Minutes to store is 0, none
  210.          of the TEXT that pertains to TIME will be displayed to the user.
  211.          Some people have asked that there be certain levels that will not be
  212.          able to store TIME.  By setting it to 0 and not displaying any        
  213.          information to the USER, he/she will not be confused and will not try
  214.          to access the commands.
  215.  
  216.     Max Bytes Per Day
  217.  
  218.          This is the Maximum Bytes the user is allowed to withdraw from
  219.          his/her account.  Note: This is in BYTES, and NOT 1-K bytes.
  220.          1,024,000 is equal to ONE MEG.  Use this appropriately!
  221.  
  222.     Max Bytes To Store
  223.  
  224.          This is the Maximum Bytes the user is allowed to store in
  225.          his/her account.  Note: This, too, is in BYTES, not 1-K bytes.
  226.          If this value is set to 0, none of the TEXT will be displayed to   
  227.          the user concerning BYTES.  See "Max Minutes to Store" for a more  
  228.          thorough explanation.
  229.  
  230.     # Bytes Per Minute
  231.  
  232.          This is the number of bytes that is needed to exchange for one minute.
  233.          This feature works only on the number of bytes/time that the user
  234.          currently has ON-LINE.
  235.  
  236.     You will now need to setup each Security Level that you wish to
  237.     have there.  Adjust any extra security levels to "0" if you do not want to 
  238.     set them up at this time.
  239.  
  240.  
  241.  
  242.  
  243.  
  244.  
  245.  
  246.  
  247.  
  248.  
  249.     5)  Hit ESC to bring you back to the main menu.
  250.  
  251.     6)  Select U (Users)
  252.  
  253.         When adjusting USERS information (i.e., giving them more TIME or BYTES),
  254.         be sure you hit the PgDn or PgUp key to SAVE their information.  This
  255.         is the ONLY way that information is saved.
  256.  
  257.       Now you will see a screen that looks something like this:
  258.  
  259. ╔════════════════════════════════════════════════════════════════════════════╗
  260. ║               PCB-Deposit Users Info                                       ║
  261. ║                                                                            ║
  262. ║  User Name: CAM DEBUCK               Record Number: 1     of  408          ║
  263. ║                                                                            ║
  264. ║  Date Time Stored  : 01-01-80              Alt B - Jump to Bottom Record   ║
  265. ║  Date Bytes Stored : 01-01-80              Alt F - Find User Name          ║
  266. ║  Date Time Used    : 01-01-80              Alt T - Jump to Top Record      ║
  267. ║  Date Bytes Used   : 01-01-80                                              ║
  268. ║                                                                            ║
  269. ║  Balance of Time   : 0                     Security Level: 120             ║
  270. ║  Time Stored Today : 0                           Max Time: 320             ║
  271. ║  Time Used Today   : 0                          Max Bytes: 99999999        ║
  272. ║                                                                            ║
  273. ║  Balance of Bytes  : 0                                                     ║
  274. ║  Bytes Stored Today: 0                                                     ║
  275. ║  Bytes Used Today  : 0                                                     ║
  276. ║                                                                            ║
  277. ║  No Access to Door : N                                                     ║
  278. ║                                                                            ║
  279. ║                                                                            ║
  280. ║ ESC=Exit PgDn=Frwrd PgUp=Backwrd CtrlPgDn=Forwrd 20 CtrlPgUp=Backwrd 20    ║
  281. ╚════════════════════════════════════════════════════════════════════════════╝
  282.  
  283.   When you want to start Editing Users, this is where you will do it.  Most
  284.   of the fields are pretty much self-explanatory.  However, the "No Access to  
  285.   Door" is for locking users out from using the door.  If you have a particular 
  286.   user who you do not want using PCB-Deposit, set field to "YES".
  287.  
  288.  
  289. PCB-DEPOSIT RUN TIME
  290.  
  291.   Command Line Switches
  292.     PCBDEP.EXE [Path To PCB directory] [BIOS WRITES]
  293.  
  294.       The first command line switch you will need is the DRIVE/PATH to your PCB
  295.       directory where the door was executed.
  296.  
  297.       The second one is whether or not your want BIOS WRITES to avoid screen
  298.       bleed if using MultiTasking Software (such as DesqView, DoubleDos,
  299.       OmniView, TaskView, etc.).  Answer either "YES" or "NO".
  300.  
  301. Sample Batch File Setup
  302.  
  303.       Create a batch file called "DEPOSIT" for each node and put in the        
  304.       appropriate PCB directory for each node.
  305.  
  306.       Your batch file should look something like this for each node:
  307.  
  308.      ECHO OFF
  309.      CD \DOORS\DEPOSIT
  310.      PCBDEP.EXE E:\PCB NO
  311.      ECHO       ^---------Note that this should be different for each Node
  312.      CD \PCB
  313.      BOARD.BAT
  314.  
  315.  
  316. MULTI-NODE OPERATION
  317.  
  318.     PCB-Deposit is fully Multi-Nodeable.  SHARE is detected if running in
  319.     a NETWORK or Multi-Tasking type environment.  All you need to do is
  320.     make sure you give the appropriate PATH for each PCB directory when
  321.     running the door.
  322.  
  323.  
  324. TEXT FILES
  325.  
  326.     Files that can be MODIFIED by the Sysop:
  327.  
  328.     DEPTEXT  - This file is used for displaying miscellaneous information
  329.             to the user when he/she selects "D" from the main menu in the
  330.             door.  Feel free to modify this and change the COLOR CODES.
  331.             Note: NO line can exceed 40 characters in length.
  332.  
  333.     LOCKOUT  - This file contains information telling the USER why he
  334.             can NOT have access to the door.  This is displayed when
  335.             the users LOCKOUT field is set to "Yes" in DPSM.
  336.  
  337.     EVENT    - This file contains information telling the USER why he
  338.             can NOT withdraw TIME.  This is displayed to the user when
  339.             an event is upcoming or his/her time is already MAXED out
  340.             because of an event.
  341.  
  342.     LVLMIS   - This information file explains why the USER cannot access
  343.             the door.  This happens when his/her SECURITY LEVEL is not
  344.             found in the DPSM Security Levels area.
  345.  
  346.     WELCOME  - This file contains information when the user first logs into
  347.             the door.  It's displayed only once.  This is the ASCII
  348.             version.
  349.  
  350.     WELCOMEG - Same as above, but with GRAPHICS.
  351.  
  352.  
  353.  
  354. CLOSING INFORMATION
  355.  
  356.       The UNREGISTERED version of PCB-Deposit will work on all ComPorts.
  357.       The door will read in your PCBOARD.DAT for each node and get the
  358.       proper information if you are using non-standard comports.
  359.  
  360.       If you find this door of use, please see the REGISTER.FRM file on how
  361.       to register.  If you have any suggestions or improvements that you
  362.       would like to see in the door, please let me know.
  363.  
  364.       If you are having any problems or would just like to pop in and say
  365.       hi, you can reach me via my BBS at:
  366.  
  367.           BBS  (801)489-3558 [HST 1440]
  368.           BBS  (801)489-7558 [2400 Baud]
  369.         VOICE  (801)489-8935 [9 am-5 pm (MST)]
  370.  
  371.       I can also be reached via U'NI-net Network in the Sysops Conference
  372.       or the ILink Sysops Conference.
  373.  
  374.  
  375.    MultiLingual Support
  376.  
  377.      PCB-Deposit is fully capable of multilingual support.  All you need to
  378.      do is translate the ENGLISH DEPTEXT to your multilingual.  If you do
  379.      translate one of these files, you may think about uploading it to my support
  380.      BBS so others can grab it. Just add the language extension to the DEPTEXT 
  381.      file name (i.e., DEPTEXT.FRE for French).
  382.  
  383.    PCBoard Macros and PCB-Deposit Macros:
  384.  
  385.      For the most part all PCBoard Macros are supported.
  386.      PCB-Deposit has its own macros as well.  These are:
  387.  
  388.        @BYTESUSED@   - Total amount of Bytes used so far
  389.        @BYTESAVAIL@  - Total amount of Bytes Available for today
  390.        @BYTESWD@     - Total amount of Bytes WithDrawn today
  391.        @BYTESDEP@    - Total amount of Bytes Deposited today
  392.        @MAXBYTES@    - Maximum Bytes allowed to withdraw
  393.        @MAXTIME@     - Maximum Bytes allowed to store
  394.        @MINAVAIL@    - Minutes Available to withdraw
  395.        @MINDEP@      - Minutes Deposited today
  396.        @TBYTESDEP@   - Total Bytes Deposited in Door
  397.        @TBYTESWD@    - Total Bytes Withdrawn
  398.  
  399.  
  400. REMINDER:  If you are using DPSM.EXE and come to a USER that is BLANK or
  401.         messed up, you need to PACK your USERS.INF file as it, too, is corrupted.
  402.  
  403.